Skip to main content
SLU publication database (SLUpub)

Research article2007Peer reviewed

Perovskite thin films grown by direct liquid injection MOCVD

Andrieux M, Gasqueres C, Legros C, Gallet I, Herbst-Ghysel M, Condat M, Kessler VG, Seisenbaeva GA, Heintz O, Poissonnet S

Abstract

The continuous scaling down of devices dimensions, in silicon technology, imposes to replace silicon dioxide. Among the potential candidates for new capacitors, some perovskite structure materials (such as titanate or zirconate) show interesting characteristics. The first way to develop perovskite films is to use a mixture of two beta-diketonates by varying the solution's cationic ratio. However, our previous results on SrZrO3 showed that a wide parametric study had to be carried on. Another way is to design novel heterometallic precursors that contain both cations on, the same molecule. The ligands could be chosen so that peculiar evaporation and decomposition temperatures could be obtained. Thus, perovskite films (SrZrO3) were deposited on plane Si(I 0 0) substrates by direct liquid injection MOCVD from two original heterometallic precursors Sr2Zr2(O '' Pr)(8)(thd)(4)('' PrOH)2 and Sr2Zr2(thd)(4)((OPr)-Pr-i)(8). The oxide films were deposited at substrate temperature ranging from 550 to 900 degrees C. At the lowest temperatures (550 and 600 degrees C) the as-deposited films were amorphous. After a postannealing at 700 degrees C for 1 h under N-2/O-2, the films deposited at 550 degrees C were crystallized in the SrZrO3 orthorhombic phase. Crystallographic and chemical structures were controlled applying grazing X-ray diffraction and infrared spectroscopy measurements. Results are discussed with respect to experimental synthesis conditions. (c) 2007 Elsevier B.V. All rights reserved

Keywords

Perovskite oxide; Strontium zirconate; MOCVD; Single-source precursor

Published in

Applied Surface Science
2007, Volume: 253, number: 23, pages: 9091-9098
Publisher: ELSEVIER SCIENCE BV