Research article2025Peer reviewedOpen access
Pilot scale hydrodynamic cavitation and hot-water extraction of Norway spruce bark yield antimicrobial and polyphenol-rich fractions
Tienaho, Jenni; Liimatainen, Jaana; Myllymaki, Laura et al.
Publications
2025
2024
Research article2024Peer reviewedOpen access
Valorizing Assorted Logging Residues: Response Surface Methodology in the Extraction Optimization of a Green Norway Spruce Needle-Rich Fraction To Obtain Valuable Bioactive Compounds
Tienaho, Jenni; Fidelis, Marina; Brännström, Hanna.
Research article2024Peer reviewedOpen access
Micromorphology and native extractive behaviour of wood powder
Das, Atanu Kumar; Agar, David A.; Rudolfsson, Magnus et al.
Research article2024Peer reviewedOpen access
Spruce, pine and fir needles as sustainable ingredients for whole wheat bread fortification: Enhancing nutritional and functional properties
Fidelis, Marina; Tienaho, Jenni; Meneguzzo, Francesco et al.
2023
Review article2023Peer reviewed
Multifaceted Laser Applications for Wood – A Review from Properties Analysis to Advanced Products Manufacturing
Islam, Md. Nazrul; Das, Atanu Kumar; Billah, Md. Morsaline et al.
Research article2023Peer reviewedOpen access
Combining behavioural TOPSIS and six multi-criteria weighting methods to rank biomass fuel pellets for energy use in Sweden
Agar, David; Hansen, Paul; Rudolfsson, Magnus et al.
2022
Research article2022Peer reviewedOpen access
Wood powder characteristics of green milling with the multi-blade shaft mill
Das, Atanu Kumar; Agar, David; Thyrel, Mikael et al.
Other conference contribution2022Open access
Bioderived Chemical Extraction from Spruce Needles – Adding Value to Forest Logging Residues
Das, Atanu Kumar; Agar, David; Favén, Leena et al.
Research article2022Peer reviewedOpen access
Gasification of pure and mixed feedstock components: Effect on syngas composition and gasification efficiency
Lestander, Torbjorn A.; Weiland, Fredrik; Grimm, Alejandro et al.
2021
Review article2021Peer reviewedOpen access
A review on wood powders in 3D printing: processes, properties and potential applications
Das, Atanu Kumar; Agar, David; Rudolfsson, Magnus et al.
Conference paper2021Peer reviewed
Green Milling of Biomass and Implications for Conversion Processes
Das, Atanu Kumar; Agar, David; Thyrel, Mikael et al.
Research article2021Peer reviewedOpen access
Raw natural rubber latex-based bio-adhesive for the production of particleboard: formulation and optimization of process parameters
Islam, Md Nazrul; Adib, Abdullah; Dana, Nabila Hasan et al.
Research article2021Peer reviewedOpen access
Investigating the influence of work piece geometry on the specific energy use in size reduction with a multi-blade shaft mill
Das, Atanu Kumar; Agar, David; Larsson, Sylvia et al.
Research article2021Peer reviewedOpen access
Fate of phosphorus and potassium in single-pellet thermal conversion of forest residues with a focus on the char composition
Hedayati, Ali; Lestander, Torbjorn A.; Rudolfsson, Magnus et al.
Research article2021Peer reviewedOpen access
Pelleting torrefied biomass at pilot-scale – Quality and implications for co-firing
Agar, David; Rudolfsson, Magnus; Lavergne, Simon et al.
Conference poster2021Open access
Wet one-step size reduction for better powders and feedstock conversion
Das, Atanu Kumar; Agar, David; Thyrel, Mikael et al.
Research article2021Peer reviewedOpen access
Multi-blade milling from log to powder in one step – Experimental design and results
Das, Atanu Kumar; Agar, David; Larsson, Sylvia et al.
Research article2021Peer reviewedOpen access
Using the macromolecular composition to predict process settings that give high pellet durability in ring-die biomass pellet production
Larsson, Sylvia H.; Agar, David A.; Rudolfsson, Magnus et al.
2020
Research article2020Peer reviewedOpen access
Effect of Torrefaction on Properties of Pellets Produced from Woody Biomass
Wang, Liang; Riva, Lorenzo; Skreiberg, Oyvind et al.
Research article2020Peer reviewedOpen access
Towards negative carbon emissions: Carbon capture in bio-syngas from gasification by aqueous pentaethylenehexamine
Ma, Chunyan; Wang, Nan; Chen, Yifeng et al.
Conference poster2020
From tree to wood powder – novel one-step mill technology
Das, Atanu Kumar; Agar, David; Fernando, Dinesh et al.
Research article2020Peer reviewed
Energy savings through late-steam injection - A new technique for improving wood pellet production
Rudolfsson, Magnus; Agar, David A.; Lestander, Torbjorn A. et al.
2019
Conference poster2019Peer reviewed
Multi-blade milling for wood-powder production
Larsson, Sylvia; Das, Atanu Kumar; Agar, David et al.
2018
Research article2018Peer reviewed
A systematic study of ring-die pellet production from forest and agricultural biomass
Agar, David A.; Rudolfsson, Magnus; Kalen, Gunnar et al.
2017
Conference paper2017Peer reviewed
Char conversion characterized by synchrotron based X-ray micro-tomography and SEM-EDS analysis
Strandberg, A.; Thyrel, M.; Rudolfsson, M. et al.