Niittylä, Totte
- Institutionen för skoglig genetik och växtfysiologi, Sveriges lantbruksuniversitet
Sammanfattning
From an economic and environmental perspective, the use of less chemicals in the production of cellulose nanofibrils (CNFs) is advantageous. In this study, we investigated the oxidation (TEMPO/NaClO2/NaClO, pH 6.8) of softwood (SW) particles with varying amounts of TEMPO (16, 8 or 0 mg g(-1) of wood). Following, TEMPO-oxidized SW nanofibrils (TO-SWNFs) were obtained by nanofibrillation and their size, morphology, and crystallite size were assessed. Hydrogel networks of TO-SWNFs were prepared and mechanical properties were measured in dH(2)O and phosphate buffered saline (PBS) to compare their performance for possible biomedical applications such as wound dressings. The results reveal that the presence of TEMPO is of importance for TO-SWNF network properties, presenting higher eq. H2O absorption (approximate to 2500 %) and elongation at break (approximate to 10 %) with good wet strength (approximate to 180 kPa). In addition, a decrease in use of TEMPO catalyst from 16 to 8 mg g(-1) of wood is possible, without detrimental effects on hydrogel network properties (dH(2)O absorption approximate to 2000 %, elongation at break approximate to 13 %, wet strength approximate to 190 kPa) related to applications as wound dressings.
Nyckelord
Cellulose nanofibrils; Wood; TEMPO-oxidation; Hydrogel network; Absorption
Publicerad i
Carbohydrate Polymers
2025, volym: 348, nummer: Part A, artikelnummer: 122812
Utgivare: ELSEVIER SCI LTD
SLU författare
UKÄ forskningsämne
Polymerteknologi
Publikationens identifierare
- DOI: https://doi.org/10.1016/j.carbpol.2024.122812
Permanent länk till denna sida (URI)
https://res.slu.se/id/publ/142567