Skip to main content
SLU:s publikationsdatabas (SLUpub)

Sammanfattning

Collection of airborne laser scanner data for forest inventory is becoming a common practice today. To reduce cost when laser data are collected over large areas, the flight altitude or flight speed may be increased, resulting in low pulse density laser data. The effect of using a different pulse density of laser data on estimation accuracy of forest variables was investigated at stand level. Laser data were acquired by the airborne TopEye system at a 1,200-ha forest area located in southern Sweden (58°30?N, 13°40?E). The 70 selected stands were dominated by Norway spruce [Picea abies (L.) Karst.] and Scots pine (Pinus sylvestris L.) with tree height in the range of 6-28 m (mean 19 m) and stem volume in the range of 30-620 m3 ha?1 (average 286 m3 ha?1). Regression analysis was used to establish empirical functions at stand level. The pulse density of laser data was reduced from 25,000 to 40 returns ha?1. By reducing the pulse density the root mean square error (RMSE) for the tree height and stem volume estimation increased from 0.7 to 1.8 m and from 13% to 29%, respectively. A substantial decrease in estimation accuracy of tree height and stem volume could be observed at pulse densities

Nyckelord

lidar; TopEye; forest inventory; tree height; stem volume

Publicerad i

Forest Science
2007, volym: 53, nummer: 6, sidor: pp. 619-626
Utgivare: Society of American Foresters

SLU författare

Associerade SLU-program

Remningstorp

UKÄ forskningsämne

Skogsvetenskap
Miljö- och naturvårdsvetenskap

Publikationens identifierare

  • DOI: https://doi.org/10.1093/forestscience/53.6.619

Permanent länk till denna sida (URI)

https://res.slu.se/id/publ/16883