Sammanfattning

Per- and polyfluoroalkyl substances (PFAS) are a common contaminant in municipal landfill leachate and are recognized as a pollutant on global scale. The present work examined foam fractionation (FF) in batch and continuous modes as an appropriate treatment technique for PFAS removal for the landfill leachate and found stable removal efficiency of greater than 90% for PFOA (C7), PFOS (C8), PFHxS (C6), and PFHpA (C6) and 6:2 FTSA (C6). For other PFAS such as PFNA (C8), PFPeS (C4), PFHxA (C5), PFHpS (C7), and PFBS (C4), a less stable removal between 80% and 50% was achieved while between 50% and 20% removal was observed for EtFOSAA (C8), PFBA (C3), PFDA (C9), FOSA (C8), PFPeA (C4), and MeFOSAA (C8). Increased air flowrate, addition of iron (III) oxide (Fe+3) coagulant, conductivity, and greater untreated leachate PFAS concentration were factors resulting in increased removal efficiency for the majority of PFAS.Article Impact StatementEfficient PFAS removal from landfill leachate using surface-active foam fractionation treatment with examination of key process parameters.

Nyckelord

foam fractionation; landfill leachate; PFAS; removal; surface active foam fractionation; treatment techniques

Publicerad i

Awwa Water Science
2021, Volym: 3, nummer: 5, artikelnummer: e1238

SLU författare

• Ahrens, Lutz

  • Institutionen för vatten och miljö, Sveriges lantbruksuniversitet
    

UKÄ forskningsämne

Miljövetenskap


Publikationens identifierare

DOI: https://doi.org/10.1002/aws2.1238

Permanent länk till denna sida (URI)

https://res.slu.se/id/publ/118630